CCNA Collaboration Implementing Cisco Video Network Devices (CIVND) Practice Exam
Are you preparing for the CCNA Collaboration Implementing Cisco Video Network Devices (CIVND) exam? Exam Sage offers a comprehensive practice exam designed to help you master all the essential topics and skills required to succeed in this certification.
What is the CCNA Collaboration CIVND Exam?
The CCNA Collaboration CIVND exam focuses on implementing and troubleshooting Cisco video network devices. This certification validates your ability to configure, deploy, and maintain video endpoints, Cisco Expressway solutions, and multipoint conferencing units (MCU). It also covers key concepts such as video network protocols, codecs, and secure firewall traversal, essential for modern collaboration networks.
What You Will Learn
With Exam Sage’s practice exam, you’ll gain practical knowledge and confidence in:
Cisco Expressway deployment and configuration for secure traversal and remote access
Cisco Unified Communications Manager (CUCM) video endpoint management
Video codec selection and optimization for quality and bandwidth efficiency
SIP and H.323 signaling protocols and troubleshooting techniques
Multipoint conferencing using Cisco TelePresence MCU
Cisco Video Mesh architecture and peer-to-peer media routing
Network security concepts including encryption with SRTP and firewall traversal
Call Admission Control and bandwidth management for video networks
Integration of Cisco video endpoints with unified communications environments
Exam Topics Covered
Our practice exam covers the critical domains of the CIVND exam, including:
Cisco Expressway Configuration and Traversal Zones
Endpoint Registration, Provisioning, and Management
SIP and H.323 Protocol Fundamentals
Video Codec Technologies and Media Streams
Multipoint Conferencing and Content Sharing
Network Security for Video Collaboration
Troubleshooting Video Network Devices
Quality of Service (QoS) and Bandwidth Optimization
Why Choose Exam Sage for Your CCNA Collaboration CIVND Preparation?
ExamSage.com is a trusted platform specializing in exam preparation. Our practice tests are carefully crafted by industry experts to reflect the latest exam objectives and question formats. We provide:
Up-to-date, accurate questions aligned with Cisco’s official exam blueprint
Detailed explanations for every answer to deepen your understanding
Interactive, easy-to-use practice environment to track your progress
24/7 online access to practice materials from any device
Boost your confidence and increase your chances of passing the CCNA Collaboration CIVND exam on your first attempt with Exam Sage.
Sample Questions and Answers
1. What protocol does Cisco Unified Communications Manager primarily use to register IP phones and video endpoints?
A) SIP
B) SCCP (Skinny)
C) H.323
D) RTP
Answer: B) SCCP (Skinny)
Explanation: Cisco Unified Communications Manager primarily uses SCCP (Skinny Client Control Protocol) for registration and call control of Cisco IP phones and video endpoints, although it also supports SIP.
2. Which Cisco device is commonly deployed as a video endpoint in a Cisco Collaboration environment?
A) Cisco ISR Router
B) Cisco TelePresence SX Series
C) Cisco ASA Firewall
D) Cisco Catalyst Switch
Answer: B) Cisco TelePresence SX Series
Explanation: The Cisco TelePresence SX Series are dedicated video endpoints designed for high-quality video conferencing in Cisco Collaboration networks.
3. In Cisco video conferencing, what does the acronym MCU stand for?
A) Multipoint Control Unit
B) Media Control Utility
C) Multi-Channel Unit
D) Media Capture Unit
Answer: A) Multipoint Control Unit
Explanation: An MCU is a device that enables multi-party video conferencing by mixing video, audio, and data streams from multiple endpoints.
4. What port does the Cisco TelePresence Endpoint typically use for SIP signaling?
A) 5060
B) 1720
C) 443
D) 5061
Answer: A) 5060
Explanation: SIP signaling typically occurs over UDP or TCP port 5060. Port 5061 is used for secure SIP (SIPS) signaling.
5. Which codec is most commonly used for video compression in Cisco video endpoints?
A) G.711
B) H.264
C) G.729
D) MPEG-2
Answer: B) H.264
Explanation: H.264 is widely used for video compression in Cisco video endpoints due to its efficient bandwidth use and high video quality.
6. What is the primary function of Cisco Video Communication Server (VCS)?
A) Endpoint registration
B) Routing and firewall traversal for video calls
C) Video recording and playback
D) Video endpoint hardware management
Answer: B) Routing and firewall traversal for video calls
Explanation: Cisco VCS acts as a session border controller to route video calls and manage firewall traversal between video endpoints.
7. Which protocol is responsible for media transport in Cisco video conferencing?
A) SIP
B) RTP
C) SCCP
D) HTTP
Answer: B) RTP
Explanation: Real-time Transport Protocol (RTP) is used to carry audio and video media streams during video calls.
8. In a Cisco video network, what does TIP stand for?
A) TelePresence Interoperability Protocol
B) Transport Interface Protocol
C) TelePresence Interface Port
D) Transport Interconnect Protocol
Answer: A) TelePresence Interoperability Protocol
Explanation: TIP is a Cisco proprietary protocol used for interoperability between Cisco TelePresence systems.
9. Which of the following is NOT a feature of Cisco TelePresence System?
A) HD video and audio
B) Multi-party conferencing
C) IP telephony switching
D) Content sharing
Answer: C) IP telephony switching
Explanation: IP telephony switching is the function of call managers and gateways, not a TelePresence system’s direct feature.
10. What is the default username for accessing the Cisco TelePresence SX series endpoint web interface?
A) admin
B) cisco
C) tele
D) root
Answer: B) cisco
Explanation: The default username for many Cisco TelePresence endpoints is “cisco” (password is usually “cisco”).
11. Which protocol is used to control video calls and set up sessions in Cisco Video endpoints?
A) SIP
B) FTP
C) SSH
D) SNMP
Answer: A) SIP
Explanation: SIP (Session Initiation Protocol) is used to set up, manage, and terminate video calls.
12. What is the purpose of Cisco Video Network Management (VNM)?
A) Provision and manage Cisco video endpoints
B) Provide firewall security
C) Manage call routing
D) Encrypt video streams
Answer: A) Provision and manage Cisco video endpoints
Explanation: VNM allows administrators to centrally provision, monitor, and manage Cisco video endpoints.
13. How can you enable remote management on a Cisco TelePresence endpoint?
A) Enable SSH service in the endpoint settings
B) Open port 80 on the firewall
C) Disable all security features
D) Configure VLAN tagging
Answer: A) Enable SSH service in the endpoint settings
Explanation: Remote management is often enabled via SSH, which must be enabled on the endpoint for secure access.
14. Which Cisco video endpoint series supports Skype for Business integration?
A) Cisco TelePresence SX Series
B) Cisco DX Series
C) Cisco 7900 Series
D) Cisco ISR 4000 Series
Answer: B) Cisco DX Series
Explanation: The Cisco DX Series endpoints are designed for desktop video and support Microsoft Skype for Business integration.
15. What is the maximum number of participants supported in a Cisco TelePresence MCU conference?
A) 10
B) 25
C) 50
D) Varies by MCU model
Answer: D) Varies by MCU model
Explanation: The maximum number of participants depends on the specific MCU model and licensing.
16. In Cisco video devices, which transport protocol is preferred for audio and video media streams?
A) TCP
B) UDP
C) ICMP
D) HTTP
Answer: B) UDP
Explanation: UDP is preferred for media streams because it provides low latency without retransmission delays.
17. Which Cisco device is used as a gateway to connect H.323 video endpoints to SIP networks?
A) Cisco VG Series Gateway
B) Cisco ISR Router with CUBE
C) Cisco ASA Firewall
D) Cisco Catalyst Switch
Answer: B) Cisco ISR Router with CUBE
Explanation: Cisco Unified Border Element (CUBE) on ISR routers acts as a gateway and session border controller for protocol interworking.
18. Which of the following is a Cisco proprietary protocol used for endpoint discovery and call control?
A) H.323
B) SIP
C) SCCP
D) MGCP
Answer: C) SCCP
Explanation: SCCP (Skinny) is Cisco’s proprietary protocol for endpoint signaling and call control.
19. What is the default protocol for encrypting media streams on Cisco TelePresence endpoints?
A) SRTP
B) SSL
C) TLS
D) IPsec
Answer: A) SRTP
Explanation: Secure RTP (SRTP) is used to encrypt audio and video media streams.
20. Which tool would you use to troubleshoot Cisco video endpoint call signaling issues?
A) Wireshark with SIP filters
B) Cisco AnyConnect
C) NetFlow Analyzer
D) Ping
Answer: A) Wireshark with SIP filters
Explanation: Wireshark is a packet analyzer useful for inspecting SIP call signaling and diagnosing issues.
21. What is the function of Cisco TelePresence Content Server?
A) Record and store video conferences
B) Provide endpoint provisioning
C) Manage call routing
D) Translate video protocols
Answer: A) Record and store video conferences
Explanation: The Content Server records video meetings for later playback.
22. Which feature allows Cisco video endpoints to adapt video quality based on network conditions?
A) Adaptive Bitrate Streaming
B) VLAN tagging
C) QoS marking
D) Encryption
Answer: A) Adaptive Bitrate Streaming
Explanation: Adaptive bitrate streaming dynamically adjusts video quality to maintain call quality over varying network conditions.
23. What is the purpose of Cisco TelePresence Interop Server?
A) Enable video interoperability between Cisco and third-party video systems
B) Route SIP calls within Cisco UC environment
C) Provide video endpoint security
D) Record video calls
Answer: A) Enable video interoperability between Cisco and third-party video systems
Explanation: The Interop Server helps Cisco video systems communicate with non-Cisco systems.
24. How can you upgrade the firmware on Cisco TelePresence endpoints?
A) Using the endpoint web interface or Cisco Video Network Management (VNM)
B) Using FTP only
C) Through the Cisco ASA firewall
D) Via USB only
Answer: A) Using the endpoint web interface or Cisco Video Network Management (VNM)
Explanation: Firmware upgrades can be done via the endpoint’s web interface or centrally via VNM.
25. What is the significance of the Cisco TelePresence Codec?
A) Encodes and decodes audio and video signals
B) Manages endpoint licensing
C) Provides IP routing
D) Monitors network traffic
Answer: A) Encodes and decodes audio and video signals
Explanation: The codec compresses and decompresses video and audio streams for transmission.
26. What is the default IP address class used by Cisco video endpoints for self-assigned IP addresses if DHCP is unavailable?
A) Class A (10.x.x.x)
B) Class B (172.16.x.x)
C) Class C (169.254.x.x)
D) Class D (224.x.x.x)
Answer: C) Class C (169.254.x.x)
Explanation: 169.254.x.x is the APIPA range used when no DHCP server is available.
27. Which Cisco TelePresence endpoint feature allows content sharing during a video call?
A) BFCP (Binary Floor Control Protocol)
B) RTP
C) SRTP
D) HTTP
Answer: A) BFCP (Binary Floor Control Protocol)
Explanation: BFCP enables content sharing control in video conferences.
28. In the Cisco video network, what is the purpose of the Cisco TelePresence Management Suite (TMS)?
A) Schedule, manage, and monitor video conferences
B) Route video calls
C) Encrypt video streams
D) Act as a video endpoint
Answer: A) Schedule, manage, and monitor video conferences
Explanation: TMS provides centralized management for video conferencing environments.
29. Which signaling protocol can be used for Cisco video endpoints that is compatible with Microsoft Lync/Skype for Business?
A) SIP
B) SCCP
C) H.323
D) MGCP
Answer: A) SIP
Explanation: SIP is compatible with Microsoft Lync/Skype for Business environments.
30. What is the primary benefit of deploying Cisco Expressway in a video network?
A) Secure traversal of video calls through firewalls
B) Call recording
C) Endpoint provisioning
D) Video codec licensing
Answer: A) Secure traversal of video calls through firewalls
Explanation: Cisco Expressway enables secure firewall traversal for video calls, allowing remote video access.
31. What command is used to view the registration status of Cisco video endpoints on Cisco Unified Communications Manager?
A) show sip-ua register status
B) show ccm-manager
C) show endpoints registered
D) Access via CUCM Device > Phone page
Answer: D) Access via CUCM Device > Phone page
Explanation: Cisco Unified Communications Manager does not have a CLI command for endpoint registration; registration status is viewed in the CUCM GUI under Device > Phone.
32. Which Cisco TelePresence endpoint feature allows integration with Microsoft Exchange for calendar-based meeting scheduling?
A) LDAP integration
B) Cisco TMS integration
C) Microsoft Exchange Web Services (EWS)
D) SIP trunking
Answer: C) Microsoft Exchange Web Services (EWS)
Explanation: Cisco endpoints can integrate with Microsoft Exchange using EWS to display calendar information and schedule meetings.
33. What is the main purpose of the Cisco TelePresence Management Suite (TMS) provisioning service?
A) To configure video endpoint settings remotely
B) To route video calls
C) To secure video streams
D) To record meetings
Answer: A) To configure video endpoint settings remotely
Explanation: TMS provisioning enables administrators to remotely push configuration changes to endpoints.
34. When configuring a Cisco video endpoint for SIP, what is the role of the Proxy Server?
A) Routes SIP signaling messages between endpoints and servers
B) Encrypts media streams
C) Transcodes audio codecs
D) Records video calls
Answer: A) Routes SIP signaling messages between endpoints and servers
Explanation: The Proxy Server routes SIP messages to establish, maintain, and terminate sessions.
35. Which video protocol is typically used by Cisco video endpoints for H.323 signaling?
A) TCP port 1720
B) UDP port 5060
C) TCP port 5061
D) UDP port 5004
Answer: A) TCP port 1720
Explanation: H.323 signaling commonly uses TCP port 1720.
36. How does Cisco Expressway facilitate B2B video calling?
A) By acting as a session border controller for firewall traversal
B) By encrypting RTP streams
C) By registering endpoints with CUCM
D) By managing video conference recordings
Answer: A) By acting as a session border controller for firewall traversal
Explanation: Expressway enables secure traversal of video calls across company borders.
37. What Cisco video device feature enables endpoints to automatically detect network conditions and adjust media quality accordingly?
A) Network Adaptive Rate Control
B) Cisco AutoQoS
C) Packet Fragmentation
D) VLAN tagging
Answer: A) Network Adaptive Rate Control
Explanation: This feature adjusts bitrate based on network conditions to optimize call quality.
38. Which two protocols are commonly used for NAT traversal in Cisco video networks?
A) STUN and TURN
B) FTP and TFTP
C) TCP and UDP
D) HTTP and HTTPS
Answer: A) STUN and TURN
Explanation: STUN (Session Traversal Utilities for NAT) and TURN (Traversal Using Relays around NAT) are used to enable NAT traversal for media streams.
39. What is the purpose of Cisco TelePresence Digital Media Player (DMP)?
A) To play recorded video content in a TelePresence environment
B) To act as a video endpoint
C) To route calls
D) To encrypt media streams
Answer: A) To play recorded video content in a TelePresence environment
Explanation: DMP devices play back stored video content during presentations or conferences.
40. What type of video endpoint is the Cisco SX10?
A) Personal desktop video endpoint
B) Room-based video conferencing system
C) Multipoint Control Unit
D) Gateway device
Answer: B) Room-based video conferencing system
Explanation: The Cisco SX10 is a compact room-based video endpoint designed for small to medium meeting rooms.
41. Which Cisco video endpoint feature supports multi-camera input switching?
A) MultiStream video
B) Content Sharing
C) Cisco Digital Media Player
D) BFCP
Answer: A) MultiStream video
Explanation: MultiStream video allows multiple video streams from different cameras or sources to be sent simultaneously.
42. How does Cisco TelePresence Content Server integrate with video endpoints?
A) Via RTSP protocol for streaming recorded content
B) Through SIP signaling
C) Using FTP for file transfer
D) Via VLAN tagging
Answer: A) Via RTSP protocol for streaming recorded content
Explanation: Content Server streams recorded meetings using RTSP to video endpoints.
43. What is the role of the Cisco TelePresence Video Communication Server (VCS) Control in a video network?
A) Registrar and gatekeeper functions for video endpoints
B) Call recording
C) Content sharing management
D) Media encryption
Answer: A) Registrar and gatekeeper functions for video endpoints
Explanation: VCS Control acts as a registrar for endpoints and manages call control functions.
44. Which command enables you to capture packets on a Cisco TelePresence endpoint?
A) diagnostic capture
B) show capture
C) debug video
D) Packet capture must be done externally
Answer: D) Packet capture must be done externally
Explanation: Cisco TelePresence endpoints do not support packet capture via CLI; captures must be done on the network level.
45. Which Cisco video endpoint management tool provides device health and usage reporting?
A) Cisco TelePresence Management Suite (TMS)
B) Cisco Unified Communications Manager (CUCM)
C) Cisco Expressway
D) Cisco Video Network Management (VNM)
Answer: A) Cisco TelePresence Management Suite (TMS)
Explanation: TMS provides detailed reports on device health, usage, and call quality.
46. What type of signaling protocol does Cisco VCS support to interconnect Cisco and non-Cisco endpoints?
A) Both SIP and H.323
B) Only SCCP
C) Only SIP
D) Only H.323
Answer: A) Both SIP and H.323
Explanation: Cisco VCS supports both SIP and H.323 signaling for interoperability.
47. What is the function of BFCP in Cisco video conferencing?
A) Content sharing control protocol
B) Media encryption protocol
C) Call signaling protocol
D) Video codec
Answer: A) Content sharing control protocol
Explanation: BFCP (Binary Floor Control Protocol) manages content sharing permissions and floor control.
48. Which video device would you use for multipoint video conferencing in a Cisco Collaboration deployment?
A) Cisco TelePresence MCU
B) Cisco DX80
C) Cisco SX10
D) Cisco ISR Router
Answer: A) Cisco TelePresence MCU
Explanation: The MCU supports multi-party video conferencing by mixing multiple video streams.
49. Which of the following protocols can be used to encrypt SIP signaling traffic?
A) TLS
B) SRTP
C) FTP
D) HTTP
Answer: A) TLS
Explanation: Transport Layer Security (TLS) is used to encrypt SIP signaling messages.
50. How can you enable secure video media streams on Cisco TelePresence endpoints?
A) By enabling SRTP in endpoint settings
B) By configuring VLANs
C) By enabling TLS on signaling only
D) Using FTP
Answer: A) By enabling SRTP in endpoint settings
Explanation: SRTP provides encryption for media streams, ensuring secure audio and video.
51. What is the typical function of a Cisco Video Network Management (VNM) server?
A) Centralized management and provisioning of video endpoints
B) Firewall traversal for video calls
C) Codec licensing
D) Media streaming
Answer: A) Centralized management and provisioning of video endpoints
Explanation: VNM automates deployment and management of Cisco video endpoints.
52. Which Cisco TelePresence endpoint supports desktop video calling and integrates with Microsoft Skype for Business?
A) Cisco DX Series
B) Cisco SX Series
C) Cisco MCU
D) Cisco DMP
Answer: A) Cisco DX Series
Explanation: DX Series endpoints are designed for desktop use and support Skype for Business.
53. What Cisco feature helps maintain call quality during network congestion?
A) Cisco QoS (Quality of Service)
B) VLAN tagging
C) SSH access
D) Packet fragmentation
Answer: A) Cisco QoS (Quality of Service)
Explanation: QoS prioritizes video and voice traffic to maintain call quality.
54. Which device in a Cisco video network is responsible for transcoding video streams between different codecs?
A) Cisco TelePresence Transcoder
B) Cisco VCS
C) Cisco TMS
D) Cisco Expressway
Answer: A) Cisco TelePresence Transcoder
Explanation: The Transcoder converts video streams between different codecs for interoperability.
55. What is a key benefit of using Cisco TelePresence devices with Dual Screens?
A) Simultaneous display of video and shared content
B) Redundancy for video streams
C) Increased audio quality
D) Easier device management
Answer: A) Simultaneous display of video and shared content
Explanation: Dual screens allow users to view the video call and content sharing simultaneously.
56. How does Cisco TelePresence Expressway differ from Cisco VCS Control?
A) Expressway provides firewall traversal for remote access, VCS Control manages internal signaling
B) Expressway records meetings, VCS Control routes calls
C) Expressway manages device provisioning, VCS Control handles encryption
D) They are the same product
Answer: A) Expressway provides firewall traversal for remote access, VCS Control manages internal signaling
Explanation: Expressway extends video capabilities outside the firewall, while VCS Control manages internal endpoint registrations.
57. What port does Cisco Expressway use for secure video signaling?
A) TCP 8443
B) UDP 5060
C) TCP 1720
D) UDP 5004
Answer: A) TCP 8443
Explanation: Expressway uses TCP 8443 for secure signaling and management.
58. What is a key capability of Cisco TelePresence endpoint multi-stream video?
A) Send and receive multiple independent video streams simultaneously
B) Encrypt video using TLS
C) Transcode video streams
D) Record meetings
Answer: A) Send and receive multiple independent video streams simultaneously
Explanation: Multi-stream video improves video conferencing by supporting multiple video feeds (e.g., video + content).
59. Which Cisco endpoint feature improves security by restricting administrative access?
A) Role-based access control (RBAC)
B) VLAN tagging
C) SRTP
D) BFCP
Answer: A) Role-based access control (RBAC)
Explanation: RBAC limits access to administrative features based on user roles.
60. What is the significance of Cisco Unified Communications Manager in a video collaboration network?
A) Central call control for video and voice endpoints
B) Firewall traversal
C) Video endpoint firmware upgrades
D) Video recording
Answer: A) Central call control for video and voice endpoints
Explanation: CUCM provides call processing and device registration for both voice and video devices.
